Since 1994, ATS has been providing the Hydrocarbon industry with
Surface Treatment services through a variety of Corrosion Protection
Technologies. Our scope of services includes -TSA Coating, Special
Corrosion Coating and Wear Component Manufacturing. Repair and Reclamation
of Turbo Machinery components is also undertaken at our plant.
The ATS team has been involved in the application of TSA coatings
since past 15 years.
We undertake jobs in following industries
Oil Refineries LNG Terminals Fabrication Yards
Petrochemical Chemical Plants Fertilizer Plants
These coatings are undertaken by Twin Wire Arc Spray system. We use multiple systems for
reducing coating time and have utilised upto seven systems
simultaneously for coating single equipment.
We follow SSPC 1 solvent cleaning procedure for removing contaminants on equipment surface. SSPC 6 procedure is followed for blasting on component. For Twin Wire Arc Spray coating the internationally accepted Shell DEP is followed. In several Indian refineries and Petrochemical units EIL coating specifications are implemented.
COATINGS IN CONFINED SPACE & COASTAL ENVIRONMENT
Our blasting operators and coating technicians have obtained expertise
in Confined Space as well as coastal environment operation both of which require very high skill level.
LNG TERMINAL COATING
We have undertaken very critical coating of ORV
(Open Rack Vaporizer) units in Hazira LNG Terminal.
The job requires high level of technical skill and experience of working in compact space.
Our senior technicians have undergone training in Japan for ORV coating.
The first two ORV coating jobs were performed under the supervision of
Japanese engineers, subsequently our team has completed three jobs
Typical TSA Application is done on Following
Tankages Agitators Absorbers
Reactors Heat Exchangers Process Columns
Flare Stacks Pipe Spools Crane Boom
INVENTORY FOR MULTIPLE JOBS
We hold a large in-house inventory of Coating Systems, Blasting
machines, Distribution Boards & Panels, jigs, fixtures, testing & Measuring instruments. This inventory in combination with our experienced welders, blasting operators, machinists, Grinders, coating technicians are able to take up multiple, multi-location jobs across
INSPECTION BY EPC CONSULTANTS
Our field coatings have undergone stringent inspections by EPC consultants including EIL, Jacobs SA, Exxon Mobil, CB&I, JGC, Bechtel. The wear components manufactured at our plants are approved by BHEL, ARECO, SIEMENS, L&T Mitsubishi.
Our state of art 22000 sq.ft. plant has been producing components for Oil & Gas industry for
over a decade. The acoustic Spray booth built to international standards & Specifications is equipped with Robotic facility and HP/HVOF coating system for delivering highly durable protective coatings on wear components.
Precision lathes, grinding machines, customized
attachments, super polishing equipment and special abrasives combine
with our machinists and grinding operators to provide the critical surface finishes and tight tolerances required by our customers.
Components produced in our plant include
Plunger Piston Rod Compressor Rod
Shaft Sleeve Valve cone Spindle Valve Gate & Seat
REPAIR & RECLAMATION
Components repaired, reclaimed, recoated in our Plant include
Bearing Housing Rotor Shaft Valve Body
Impeller Disc Impeller Shaft Pump casing
ATS is committed to providing safe work environment to all employees in plant as well as onsite. Technicians and supervisors are provided appropriate PPE at all work places undergo safety training programs at regular intervals.